Wireless Smoke Detector View larger

Wireless Smoke Detector Stand-Alone 9V

GA019

New

Wireless Smoke Detector Stand-Alone 9V

More details

In Stock Riga

14,99 €

More info

General:
Operating voltage: DC 12V(network type), 9V battery (independence or wireless type) 
Static current: ≤200uA (network type), ≤10uA (independence or wireless type) 
Alarm current: ≤20mA 
Indicate alarm: red LED flash 
Sound level: ≥85dB/m (independence or wireless type) 
Operating temperature: -10~+50 
Operating humidity: ≤95%RH 
Detecting area: 20 square meter 
Sensitivity: I or II or III level 
Alarm output: sound & flash alarm (independence type), RF signal 315MHz or 433RHz(wireless type), relay output NO/NC (network type) 
Size: 107*35mm 
Execute criterion: GB4715-1993 
Installation:
(network type) Connect DC 12V power red wire for anode black for cathode, white for COM orange for NO, yellow for NC 
Connect the power; the detector comes into operating state. Indicating LED flashes once per 40 seconds, once per 1 second at alarm state 
Select proper place (normally mounted on the center of the ceiling), fix the mounting base, then the detector into the base and turn it. 
After installation, press the test button to test the output of the detector. LED should flash once per is. the detector should give out should (independence type), should send out RF signal (wireless type), should driver relay (network type) 
You can press the test button to test the detector or blow a little of smoke into the detector to test it work properly. The detector will recover to normal working state when the smoke disperse

 

General:

  • Operating voltage: DC 12V(network type), 9V battery (independence or wireless type) 
  • Static current: ≤200uA (network type), ≤10uA (independence or wireless type) 
  • Alarm current: ≤20mA 
  • Indicate alarm: red LED flash 
  • Sound level: ≥85dB/m (independence or wireless type) 
  • Operating temperature: -10~+50 
  • Operating humidity: ≤95%RH 
  • Detecting area: 20 square meter 
  • Sensitivity: I or II or III level 
  • Alarm output: sound & flash alarm (independence type), RF signal 315MHz or 433RHz(wireless type), relay output NO/NC (network type) 
  • Size: 107*35mm 
  • Execute criterion: GB4715-1993